Facebook Pixel
Skip to content

D: High risk activities

2.1.1 For further information on the Building regulations and fire safety document visit the NFCC website.

2.1.1 For further sources of information and guidance relating to roof work visit the following websites:

2.1.1 For further information on the Safety Steps guidance and Building Regulations and fire safety document visit the websites. 

2.3.1 The Advisory Committee for Roofsafety is a body dedicated to making working on roofs safer. It was established in 1998 and is made up of nominees from HSE, trade associations and organisations involved in roof work that provide many years of experience of involvement in working on roofs in the advice given in their documents.

2.3.2 For additional information and resources visit the HSE website.

2.3.2.1 The Advisory Committee for Roofsafety (ACR), which is the lead authority in the UK on roof work health and safety and represents all the relevant trade associations, has published jointly with the HSE definitive guidance on what constitutes fragile material: Red book – Test for non-fragility of large element roofing assemblies (ACR[M] 001:2019).

2.4.2 For further information refer to the ACR’s Guidance note for competence and general fitness requirements to work on roofs.

2.4.3.2 For detailed guidance on wind speed advice for different roof work refer to the HSE guidance Health and safety in roof work (HSG33).

2.4.3.2 For further information refer to the National Federation of Roofing Contractors’ guidance booklet Roofing and cladding in windy conditions.

2.4.3.3 For further information refer to the HSE guidance Fire safety in construction (HSG168).

2.5.6 For further information refer to Solar panel installation (GS001) (907KB, PDF)

2.6 Refer to the HSE publication Health and safety in roof work (HSG33) (paragraphs 170-202) and Fragile roofs (GEIS5) for details of the dangers presented by fragile surfaces:

2.7 The HSE has produced Asbestos essentials, a task manual for building, maintenance and allied trades on how to safely carry out non-licensed work involving asbestos.

2.8.2 For further information on this course, and the regulations, refer to:

2.8.7.1 For further information refer to the following:

2.8.7.2 For further information visit the International Powered Access Federation website.

2.8.7.3 For further information visit the Specialist Access Engineering and Maintenance Association website.

2.8.8 For further information refer to the following:

2.9 For further information refer to Health and safety in roof work (HSG33) and the NFRC guidance for handling roofing sheets and recommended safe wind speeds.

4.1.1 The British and European Standards can be accessed via the British Standards Institution (BSI) website.

4.1.1 Visit the Scaffolding Association and NASC websites for further information:

4.1.3.1 The CISRS website provides further information on UK-recognised training schemes within the scaffolding industry. 

4.3.2 For further information, including a list of scaffold structures where bespoke design is recommended, refer to the Health and Safety Executive (HSE) scaffold checklist.

4.3.4 SG4 is free to download from the NASC website 

4.3.5 For further information on rescue planning refer to:

4.6 For further information about scaffold inspection qualifications refer to the CISRS scaffold inspection training scheme (SITS)

4.6.4 For further information refer to Access and egress from scaffolds (SG25:20).

4.7.2 Guidance on protection of the public (SG34:17) provides general advice for scaffolds erected in the public domain, including the planning required and the range of precautions that should be considered to eliminate the likelihood of harm (for example, through falling material or transport accidents).

4.7.2 TG20 includes compliant scaffolding features (such as pavement lifts up to 2.7 m and light-duty protection fans) .

4.7.2 Reference should also be made to the HSE guidance document Protecting the public - Your next move (HSG151).

4.7.5 For further information, refer to the: 

7.3.1 The guidance document Avoiding danger from underground services (HSG47) can be downloaded from the HSE website.

7.3.3 Full information can be obtained from the Positioning and colour coding of underground utilities' apparatus.

7.4.1 The Utility Strike Avoidance Group (USAG) has a free online toolkit, Best practice in avoiding underground services.

7.6.4 For information on working adjacent to underground pipelines and the location of underground pipelines around the UK visit the Linewatch and Linesearch websites.

7.8.3 For further information refer to the HSE guidance note Avoiding danger from overhead power lines (GS6).

8.4 The complete regulations and the ACoP and guidance notes can be viewed online:

8.5 Tunnelling offers more specific challenges. For the latest updates on training standards visit the Pipe Jacking Association and the British Tunnelling Society websites:

8.6.14.2 The HSE publication Respiratory protective equipment at work – A practical guide (HSG53) sets out the nominal protection factor for each type of respirator and describes their limitations; it should be carefully consulted in cases of doubt.

9.3.1 For further guidance on DSEAR visit the HSE website. 

9.4.2 For further information on the requirements of CDG and ADR visit the HSE website.

9.7.3 Gas cylinder identification. Label and colour coding requirements  (TIS6) can be downloaded for free from the British Compressed Gases Association website 

9.8.7.1 The HSE has published a leaflet Working safely with acetylene (INDG327) and the British Compressed Gases Association (BCGA) has a useful leaflet The carriage of small quantities of gas cylinders on vehicles as well as a wider range of publications that may be helpful:

9.8.7.3 For information on fire extinguisher requirements when carrying dangerous goods visit the HSE guidance.

9.9.2 For further information on legislation and other resources, including guidance and incident reports, visit the HSE website.